Hux Racing, LLC
RR 3 Box 27
Goodwater, AL 35072
(256) 839-1027
emily@huxracingusa.com
RR 3 Box 27
Goodwater, AL 35072
(256) 839-1027
emily@huxracingusa.com
Hux Racing, LLC All Rights Reserved 2008
Hux Racing rear drag racing coilovers $700.00 4-way adjustable struts inserts, custom spring rate for drag racing application. Requires '91-'93 factory rear strut cores. Height adjusted by loosening set screw on collar, hold sleeve and adjust to desired height. Recommended starting height where the lower controls arms pointed slightly downhill.
Hux Racing decals
windshield $15 small side glass $5
windshield $15 small side glass $5
Hux Racing adjustable strut rods with heim joints. call for price. Used in conjunction with upgraded control arms (see pics to right of strut rods). Weight 2lbs 10oz.
Hux Racing rear lower control arms for drag racing. Eliminates all rubber bushings. Call for pricing.
Hux Racing modified factory wastegate actuator for GenIII 3s-gte. $30 requires core.
Hux Racing 4" air intake kit for GenIII 3s-gte. $380 comes with 4" air filter, support bracket for air filter, (2) silicone hoses, (5) hose clamps, Hux Racing preformed coolant hose and modified hard line. This allows the 4" air inlet pipe the most direct route to the turbo. This setup has been proven on dynojet runs to deliver an average of 7+ peak rwhp on 6 different MR2s over using 3" air filters. Comes in silver or black finish, choice of silicone hose color.
Crankcase filter for GenIII 3s-gte. Eliminates hose to turbo. $25
Billet Aluminum shifter bushings $50. Replaces damaged and worn bushings and eliminates excessive play in shifting. High quality aluminum housing with spherical bearings provide longevity and does not cause cable binding as associated with solid shifter bushings. Comes with instructions and necessary hardware as pictured.
3" downpipe for GeIII or GenII 3s-gte $275. Constructed of mild steel with GM style O2 bung installed at proper height to prevent O2 sensor error. Jet-Hot high temperature coated available.
Complete 3" i.d. exhaust-downpipe and b-pipe in mild steel, dual magnaflow mufflers with stainless steel piping,choice of tip style. Coated in Jet-Hot high temperature bright silver. $1500.
Lightweight alternator bracket installs in the a/c position used for those running short runner intakes $130. (Pictured on the left.)
Weighs 1 1/2lbs. Construction has been tested for 2 years under high vibration & resonance at 800rwhp.
Factory alternator bracket as pictured below weighs 11 lbs.
Factory mr2 turbo alternator weighs 13lbs 8.25oz with stock pulley.
Our bracket uses the 94+ Camry alternator which weighs 9lbs 110z.
Weighs 1 1/2lbs. Construction has been tested for 2 years under high vibration & resonance at 800rwhp.
Factory alternator bracket as pictured below weighs 11 lbs.
Factory mr2 turbo alternator weighs 13lbs 8.25oz with stock pulley.
Our bracket uses the 94+ Camry alternator which weighs 9lbs 110z.
Lightweight alternator bracket for using in the factory alternator position. Retains a/c $250. (Pictured above.)
Weighs 1lb 15oz.
Hux Racing Billet Aluminum CNC machined alternator underdrive pulley as pictured above & in thumbnail installed on alternator. Can be used with Mr2 or Camry factory alternator. $95
Weighs 1lb 15oz.
Hux Racing Billet Aluminum CNC machined alternator underdrive pulley as pictured above & in thumbnail installed on alternator. Can be used with Mr2 or Camry factory alternator. $95